DynaVap OmniVong Hydra XL
DynaVap OmniVong Hydra XL
DynaVap OmniVong Hydra XL
DynaVap OmniVong Hydra XL

DynaVap OmniVong Hydra XL

Buy Now, Pay Later more info >>

Why Buy From Us?
  • Fast Express Shipping Available

    Order before 3pm (AEST) and we will send your order out on the same business day. You can be vaping tomorrow if you live in an AusPost express zone.

  • No Hassle Local Warranty

    Simply send us an email, and we’ll handle the rest!

  • We Are Actually in Australia

    Don't be fooled by overseas companies who misleading advertise to be located in Australia. If they don't have an ABN number on their website then they probably aren't shipping your order locally. All our orders ship from Brisbane.


Variable Vapor Flow Adjustment just like the OmniVap, this model includes a 14mm Wood HydraVonG Stem midsection with Omni Mouthpiece assembly. With the 14mm taper built into the stem, it mates perfectly with most 14mm adapters. The Omni system has a specialized design to allow for simple adjustment of flow restriction, allowing complete control of the vapor to air intake ratio. Adjust by simply twisting the mouthpiece, which extends/retracts the condenser into the back end of the tip. It is not compatible with the M Tip or body midsections.

DynaVap strongly recommend the routine use of DynaWax to clean and moisturize the wood. Coloration and/or grain patterns may vary.

DynaVap OmniVong Hydra XL Vaporizer Specifications

Manufacturer: DynaVap LLC (USA)
Device Dimensions: 14 x 109 mm (approx)
Materials: Titanium, wood
Heating Time: On demand
Material Compatibility: Dry herb, concentrates

DynaVap OmniVong Hydra XL Vaporizer - What's in the Box:

DynaVap OmniVong Hydra XL Vaporizer

Storage Tube

User Guide

DynaVap OmniVong Hydra XL Vaporizer Instructions


  1. Twist off the cap, fill the loading chamber with material (coarse to finely ground) and put the cap back on.
  2. Slowly rotate the Nonavong while applying heat to the cap, a jet torch style lighter works best.
  3. Once you hear the Nonavong's cap click it's at the proper temperature. Begin taking your draws; you should get 1-2 draws at the proper temperature before clicking again indicating it's below temperature.
  4. Make sure you wait until you hear the cooldown click before applying more heat. To avoid combustion DO NOT apply more heat before the cooldown click.
  5. Once you hear the cooldown click you can apply more heat until you hear the unit click again indicating it's back up to temperature; you can now take more draws.
  6. Repeat steps 2-5 until your material stops producing vapor for complete extraction.

Recommended Items